Ahlborn ALMEMO 2390-3 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 24

Ahlborn ALMEMO 2390-3 Скачать руководство пользователя страница 22

9. ELECTROMAGNETIC COMPATIBILITY

ALMEMO

®

measuring instrument 2390-3 complies in full with the safety requi-

rements specified in the EU directive on the approximation of Member States’
laws relating to electromagnetic compatibility (EMC) (89/336/EEC).

The following standards have been applied in evaluating the product :

IEC 61326:1997+A1:1998+A2:2000
IEC 61000-6-3:1996
IEC 61000-6-1:1997
IEC 61000-4-2:

1995+A1:1998+A2:2000

8kV

IEC 61000-4-3:

1995+A1:1998+A2:2000

3V/m

IEC 61000-4-4:

1995+A1:2000

2kV

The following advisory notes must be observed when operating the device :
1. If the standard sensor is extended (1.5 meters) care must be taken to en-

sure that the measuring lines are not laid together with high-voltage power
cables and that they are properly shielded so as to prevent spurious inter-
ference from being induced in the system.

2. Using the device in strong electromagnetic fields may aggravate measu-

ring errors (<50 uV at 3 V/m and 1.5 meters thermocouple sensor). After
exposure to such irradiation ceases, the device will again operate within its
technical specifications

.

22

ALMEMO



2390-3

Electromagnetic cmpatibility

«
...
20
21
22
23
24
»

Содержание ALMEMO 2390-3

























Отзывы:

Нет отзывов