7.3.5 Time and Date of Start, Time and Date of End
A sequence of measurements can, at certain points in time, be automatically
started and stopped. For this purpose, the time and date of the start and the
time and date of the end can be programmed. If no date has been specified
the measurement is performed on a daily basis at the specified time interval.
The actual time must be programmed before.
Start Time:
TIME
F
- - - - - -
S
End Time:
TIME
,
F
F
- - - - - -
E
Input of time data in the format
hh:mm:ss
(see 5.3):
0 7:3 0:0 0
S
Start date ´
S
´ and end date
´
E
´
are programmed in the same way in the
format
dd:mm:yy
and with the switch positioned on DATE (see 5.3).
Clearing of the values is performed by using the keys
ENTER
,
CLEAR
.
7.3.6 Start and Stop by Limit Values
Another possibility for starting or stopping a data logging automatically is the
triggering by the exceeding of limit values (see manual 6.6.3). The
allocation
of the start or stop command
to a limit value is performed with the switch in
position LV: MAX or LV: MIN. The key
F
allows for running the additional
function ´
AH
´ or ´
AL
´ (action Hi, Lo).
When the action is cleared the display shows:
1: - - - -
AH
The
activation
of the functions ´Start´ or ´Stop´ is performed by pressing the
key
ENTER
and selecting with the keys
▲
and
▼
.
The symbol ´
S t A r t
´
or
´
S t o P
´ flashes on the display.
The programming can be terminated by the key
ENTER
.
Display action measurement START at LV: MAX:
1:S t A r t
AH
ALMEMO
®
2290-8
37
Data Memory
Содержание ALMEMO 2290-8
Страница 1: ...Operating Instructions Data Logger ALMEMO 2290 8 V2 1 04 12 2003 ALMEMO 2290 8 1...
Страница 50: ...50 ALMEMO 2290 8 Appendix...
Страница 51: ...ALMEMO 2290 8 51 Appendix...
Страница 52: ...52 ALMEMO 2290 8 Appendix...