Ahlborn ALMEMO 2290-2/3, Руководство по эксплуатации

Страница: 20 / 44

5.4 Data Entry
The programming of numeric parameters is performed as follows:
The desired function can be selected by using keys
F1
or
F2...
o.
The programming is started by long pressing the key .
ENTER
The first digit flashes
and can be altered.
The digit can be increased using the key .
After exceeding the maximum value the cycle restarts from zero.
The digit can be decreased using the key .
After falling below zero the maximum value follows (9 or 5).
The sign can be changed using the key ± .
+/-
A switch the next digit is performed using the key . ENTER
ENTER
To switch back to the previous digit by long pressing .
ENTER
1s
ENTER
The programming process is complete
after setting the last digit and again operating the key ENTER
Programming and measured values can be cleared using ,
1s
ENTER
CLEAR
F2 F1
EINGABE
1s
ENTER
20 ALMEMO

2290-2/3
Display and Keyboard