Ahlborn ALMEMO 2290-2/3, Руководство по эксплуатации

Страница: 11 / 44

2. INITIAL OPERATION
1. Connect transducers to the sockets CH1 (and CH2) (2), see 4.
2. Ensure power supply with 9V battery or mains adapter, see 3.1, 3.2.
3. For switching on move the slide switch (1) on the left side of the unit up,
see 3.3.
4. For displaying the measured values,
select function MEAS. VALUE by using the key MEAS.VAL. (6),
use key
CH
to select the measuring channels, read meas. values,
see 7.1.1
5. Cyclic output of measured values to printer or computer
Connect peripheral device via interface cable to socket OUT1,
see manual 5.2.
Set 9600 bd, 8 data bits, 1 stop bit, no parity at peripheral device, see 9.1.
Enter time and date, as required, see 7.3.3.
Use key
F1 to select function PRINT CYCLE ´ PC ´ and program the print
cycle, see 7.3.1.
Use key
START/STOP to start and stop the cyclic meas. point scan, see 7.3.
6. Monitoring of limit values
Enter limit values, see 6.4.
Use key
F1
to select function MEAS. CYCLE ´
MC
´ and program the
measuring cycle, see 7.3.2.
Connect alarm device with alarm module to socket OUT2,
see manual 5.1.2/5.1.3.
If required, use an interface cable to connect the printer or computer for an
alarm list output to the socket OUT1, see manual 5.2.
Set 9600 bd, 8 data bits, 1 stop bit, no parity at peripheral device, see 9.1.
Use key
START/STOP
to start and stop the cyclic meas. point scan, see 7.3.
7. Evaluation of the measurement
Select function MAX VALUE ´ MH ´ or MIN VALUE ´ ML ´ by using key F1 and
query the maximum and minimum values, see 7.1.4.
ALMEMO

2290-2/3 11
Initial Operation