background image

4

EN

Stopping the system

Before altering the connections, cover the solar panel with a light 

barrier material to stop the electricity production.
First switch off the lights, disconnect the consumers, the accumu-

lator may be disconnected only after this. Carefully avoid leaving the 

consumers powered without a connected accumulator, especially in 

a sunny day, since over-voltage may damage the devices!

Maintenance

From time to time clean the surface of the solar panel with a wet 

cloth. The accumulated dust, leaves or animal waste can decrease 

significantly the performance of the solar panel, which may lead to 

unwanted depletion of the accumulator.
Avoid the depletion of the accumulator during the night, or during 

dark, cloudy days. Periodically look at the lights on the charge 

controller to check the charge level. Recharging the accumulator 

needs a lot of power at the expense of the powered devices. Keeping 

the accumulator almost charged ensures a long and trouble-free life 

of the system.

The fuse

In the case of an unwanted short circuit, the fuse (Fig. A,  ) may be 

burned out. Although it is a working method to replace the burned 

fuse with a thin copper wire, we highly recommend purchasing spare 

fuses in order to prevent causing more damage to the system in an 

event of a new short circuit.
The frequent causes of burning the fuse include:

• The distortion of the connectors inside the bulb socket, due to 

a wrong disassembly-assembly.

• Accidental touching of the wires inside the bulb socket, following 

an incorrect assembly after the power wires have been extended 

or mounted.

• Short circuits in bulbs after burning out.

• Connecting a defective consumer to the system.

Fuse parameters: 5×20 mm, glass, 10 A.

To verify or to replace the fuse, unscrew the fuse socket cap   

(Fig. A), take out the fuse and check the presence of the thin 

wire in the glass tube in the front of a strong light.

Warranty

Thank you for choosing this illumination system! We offer a warranty 

of 

12 months

, starting with the date on the invoice. During this period 

we will fix or replace the defective elements for free, but only when 

the warranty conditions below are fulfilled.
In the event of any defect during the warranty period please contact 

us by e-mail at 

[email protected]

, or by phone at 

+40 724 776 515

 

for the possible remediation the problem, or to discuss the shipping 

details of the defective components.
ATTENTION:  the bulbs and the fuse are considered as consumables, 

therefore these aren't covered by warranty! The consumer has to 

replace these parts from own budget.
ATTENTION: it is allowed to modify the system by extending or 

replacing the wires in order to shorten/extend these, but prob-

lems caused by inappropriate insulation or wrong contacts result in 

voiding the warranty!
The average usage duration of the products is five years. For this 

period, the buyer benefits, for a fee, of post-warranty service, with 

original parts.
The warranty conditions are regulated by the Romanian law and our 

company's business policies, based on the following laws and emer-

gency government decrees: O.G. 21/1992, based on the 449/2003 law, 

modified by O.U.G. 174/2008, O.U.G. 34/2014 and by O.G. 9/2016. The 

consumer rights are not affected in any way by the provided warranty.

Содержание 0146-2




















Отзывы: