AgriMetal GR-400, Руководство оператора

Страница: 15 / 76

7
2.5 PREPARATION
1. Never operate the tractor and machine until
you have read and completely understand this
manual, the tow vehicle Operator's Manual, and
each of the Safety Messages found on the safety
signs on the tow vehicle and machine.
2. Personal protec-
tion equipment
including hard
hat, safety glass-
es, safety shoes,
and gloves are
recommended
during assembly,
installation, operation, adjustment, maintaining,
repairing, removal, or moving the implement.
Do not allow long hair, loose fitting clothing or
jewelry to be around equipment.
3. PROLONGED EXPOSURE TO LOUD NOISE
MAY CAUSE PERMANENT HEARING LOSS!
Tractors with or without equip-
ment attached can often be
noisy enough to cause per-
manent, partial hearing loss.
We recommend that you wear
hearing protection on a full-time
basis if the noise in the Opera-
tor's position exceeds 80db. Noise over 85db
on a long-term basis can cause severe hearing
loss. Noise over 90db adjacent to the Operator
over a long-term basis may cause permanent,
total hearing loss. NOTE: Hearing loss from
loud noise (from tractors, chain saws, radios,
and other such sources close to the ear) is cu-
mulative over a lifetime without hope of natural
recovery.
4. Clear working area of stones, branches or hid-
den obstacles that might be hooked or snagged,
causing injury or damage.
5. Operate only in daylight or good artificial light.
6. Be sure machine is properly mounted, adjusted
and in good operating condition.
7. Ensure that all safety shielding and safety signs
are properly installed and in good condition.
2.6 MAINTENANCE SAFETY
1. Good maintenance is your responsibility. Poor
maintenance is an invitation to trouble.
2. Follow good shop practices.
- Keep service area
clean and dry.
- Be sure electrical
outlets and tools are
properly grounded.
- Use adequate light
for the job at hand.
3. Make sure there is plenty of ventilation. Never
operate the engine of the towing vehicle in a
closed building. The exhaust fumes may cause
asphyxiation.
4. Before working on this machine, shut off the
engine, set the brake, and turn fuel valve off.
5. Never work under equipment unless it is blocked
securely.
6. Always use personal protection devices such as
eye, hand and hearing protectors, when perform-
ing any service or maintenance work. Use heavy
gloves when handling sharp components.
7. Where replacement parts are necessary for
periodic maintenance and servicing, genuine
factory replacement parts must be used to restore
your equipment to original specifications. The
manufacturer will not be responsible for injuries
or damages caused by use of unapproved parts
and/or accessories.
8. A fire extinguisher and first aid kit should be kept
screws and check that all cotter pins are properly
installed to ensure unit is in a safe condition.
10. When completing a maintenance or service func-
tion, make sure all safety shields and devices
are installed before placing unit in service.
readily accessible
while performing
maintenance on this
equipment.
9. Periodically tighten
all bolts, nuts and