Step 5
: CALIBRATION :
Once the individual load cells have been firmly bolted to the platform
and the cables connected you will need a test weight to check and
calibrate the indicator to be sure it is delivering an accurate reading.
If the displayed weight is not correct complete the following simple
calibration to get the system operational.
Stand on the platform using your own body weight or the person who
may be assisting you.
To Open the
Main Menu
– press
HOLD
AND
AT SAME TIME
To Navigate Up and Down – use
Tare
and
Zero
buttons
(see arrows below buttons in diagram below)
To Navigate Left and Right – use
Count
and
Gross
(see arrows below buttons in diagram below)
To
Enter
– use the
button
(see diagram below)
To
Exit
– use the
Total
button
(see diagram below)
To go Back – use the
Hold
button
(see diagram below)
