Edition 11.98
Power Hoe 6000
11
1. Safety Instructions
Maintenance
Never carry out any maintenance or
cleaning with the engine running.
In addition, always remove spark plug
connector before you work on the engine.
Check regularly and, if necessary, re-
place all protecting devices and tools
subject to wear and tear.
Replace damaged cutting tools.
Always wear safety gloves and use
proper tools when exchanging cutting
tools.
Do not carry out repairs like welding,
grinding, drilling, etc. on structural and
safety-relevant parts (e.g. coupling de-
vices)!
Keep power hoe and attachment clean
to avoid risk of fire.
Check nuts and screws regularly for tight
fit and re-tighten, if necessary.
Ensure that you re-install all safety and
protective devices and adjust them prop-
erly after maintenance and cleaning.
Only use original agria spare parts. All
other commercial spare parts must cor-
respond to quality and technical require-
ments specified by agria.
Storage
It is not allowed to store the power hoe in
rooms with open heating.
Never park the power hoe in closed
rooms with fuel left in tank. Fuel vapours
are hazardous.
Engine, Fuel, and Oil
Never let the engine run in closed rooms.
Extreme danger of intoxication!
Careful when dealing with fuel. Great
danger of fire! Never refill fuel close to
open fire, inflammable sparks or hot
engine parts. Do not refill fuel in closed
rooms. Do not smoke when refilling!
Refill only with the engine switched off
and cooled down.
Do not spill any fuel, use a proper filling
device.
In case of fuel-spillage, push the power
hoe away from the spillage before you
start the engine.
Make sure fuel is of specified quality.
Store fuel in approved cans only.
Store anti-corrosive agents and stabiliz-
ing liquids out of reach of children. If sick-
ness and vomiting occur, see a doctor. If
fuel has contacted eyes, rinse them
thoroughly, avoid inhaling of vapours.
Read and observe enclosed instructions.
