10
Power Hoe 6000
Edition 11.98
1. Safety Instructions
For any operation do not leave the op-
erator’s position as defined by the steer-
ing handle, especially not when you turn
the machine.
Riding on the attachment during opera-
tion or in transport is not permitted.
If clogging occurs in the attachment, turn
off the engine and clean the attachment
with an appropriate tool.
In case of damage to the power hoe or to
the attachment, immediately turn off the
engine and have it repaired.
If steering causes problems, immediately
bring the power hoe to a halt and turn it
off. Have the malfunction removed without
delay.
To prevent the power hoe from sliding on
slopes make sure it is secured by another
person using a bar or a rope. This person
must be located at a higher position than
the vehicle at a safe distance from the
attachment at work.
If possible, always work horizontally to
the slope.
End of Operation
Never leave the power hoe unattended
with the engine running.
Before you leave the power hoe, turn off
the engine. Then close fuel tap.
Secure power hoe against unauthorized
use – remove spark plug connector.
Attachments
Only mount attachments with the engine
and attachment drive switched off.
Always use appropriate tools and wear
gloves when changing attachments and
parts thereof.
For mounting and dismounting attach-
ments bring support leg into proper posi-
tion and ensure stability.
Secure power hoe and attachments
against rolling off (wheel wedge).
Beware of injuries when coupling attach-
ments. Proceed with extreme caution.
Mount attachments as specified and only
couple at specified points.
Secure power hoe and attachment
against unauthorized use and rolling off
when you leave the machine. If neces-
sary, install transport or security devices
and secure.
Hoeing Attachment
Adjust protective hood of hoeing attach-
ment so that only those parts of tools
which penetrate the soil are not covered.
When hoeing, make sure hoeing skid is
adjusted properly.
