Agria 3600 075, Перевод оригинальной инструкции по эксплуатации

Страница: 57 / 76

5 Maintenance and Repair
Two-wheel tractor agria 3600 57
Machine
Transmission
Check gearbox oil level
Check the gearbox oil level before each startup
and after every 50 operating hours. Oil dipstick
and oil filling hole A/15. With the machine in a
horizontal position, the oil level must be between
the
max. and min. marks.
•
Unscrew the oil dipstick, wipe it with a clean
cloth, and screw it back in.
•
Unscrew the oil dipstick and check the oil
level. Top up oil if necessary.
Allow the gearbox to cool
down before you start mainte-
nance work. The temperature
during maintenance should
not be higher than 51° C.
Changing the gearbox oil
Change the gearbox oil after the first 50 and
then after every 300 operating hours when the
oil is at operating temperature.
•
Clean oil filler plug (A/15) and oil drain plug
(A/19) and their environment to prevent dirt
from getting into the gearbox.
•
Open the drain plug, collect the used oil in a
suitable container, and dispose of it proper-
ly.
•
Clean the drain plug.
•
Check the sealing rings. Replace if neces-
sary.
•
Screw in and tighten the drain plug with
sealing ring.
•
Fill in fresh gearbox oil up to the "max."
mark.
•
Oil filing volume and quality see "Technical
data".
•
Close the filling hole with the plug/dipstick.
Driving wheels
•
During initial startup and after each wheel
change , check and tighten the wheel bolts
or wheel nuts after the first 2 operating
hours and then during each service work
and after every
25 operating hours with
50 Nm .