Agria 3600 075 Скачать руководство пользователя страница 16

Страница: 16 / 76

1 Safety Instructions

Two-wheel tractor

agria 3600

Description of the warning, prohibition and mandatory signs

Prior to starting up the machine, read and observe the operat-
ing instructions and safety instructions.

Prior to starting cleaning, maintenance or repair work, switch
off the engine and pull the sparking-plug connector.

Caution - risk of fire

- Refuel only with the engine switched off and cooled down.

- No naked flame.

The engine exhausts contain poisonous gas

- Keep your distance.

Never run the engine in a closed room.

Handle hot engine components with caution!

Keep sufficient distance to hot surfaces.

Keep a safe distance to the mower knives when the engine is
running!

Be careful of catapulted parts, particularly on stony ground.
Keep a safe distance when the engine is running.

Remove foreign objects from the working area.

Keep a safe distance from the hoeing tools when the engine is
running!

Never work without protective devices! Prior to starting move
the protective devices to protective position.

Do not touch any moving machine parts. Wait until they are at
a complete standstill.

When working with the machine wear individual hearing pro-
tection.

Wear safety shoes.

Check the engine oil level at least every 8 operating hours.

Содержание 3600 075













































































Результаты поиска

Содержание 3600 075

Отзывы:

Бренды по названию

Популярные бренды

Agria 3600 075, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание 3600 075

Отзывы:

Бренды по названию

Популярные бренды