10
Optional Instructions to Program
Auxiliary Remotes
Create a Auxiliary Remote
Open cover to unlock remote. Push and hold
Select
button then push and
hold
Programming
button while
Select
button is still being held. Hold both
buttons until indicator light flashes red. Release both buttons. Press
CLOSE
button. Indicator light will fast flash red, then be steady green. Auxiliary
Remote has been created. Close lid to power down and lock remote.
Sync Primary and Auxiliary Remotes
Place both remotes next to each other and open lids on both remotes.
Primary Remote will flash slow green, Auxiliary Remote will flash fast red
then switch to steady green. On Primary Remote tap
Programming
button.
On Auxiliary Remote press and hold
Programming
button until indicator
light flashes fast green. Release
Programming
button on Auxiliary Remote.
Indicator light will flash slow green and programed modes will be steady red.
Auxiliary Remote is now programmed to same functions as Primary Remote.
NOTE: Multiple remotes can be synced to the Primary Remote, but the
Primary Remote must be used to create all new remotes.
Automatically Update Previously Synced Transmitters
Once synced with the Primary Remotes, Auxiliary Remotes can automatically
be updated if there are any changes to the Primary Remote. Place both
remotes next to each other and open lids on both remotes. After 5 seconds
the Auxiliary Remote will be updated to all functions of the Primary Remote.
STEP 1
STEP 2
STEP 3
