9
Program Primary Remote to Receiver
Power on both receiver and remote. On remote tap
Programming
button
once, indicator light will flash fast green. On receiver, press and hold
Programming
button until both remote and receiver slow flash green at
the same rate. Remote and Receiver are now programmed. By default the
Remote will be programmed to the tarp setting.
Clear Additional Receiver
a. Power on Receiver.
b. Press and hold the
Programming
button until the indicator light turns
steady green.
c. Power off Receiver.
STEP 3
Optional Instructions to Enable
and Program Additional Modes on
Remote Control
(adding additional Receiver)
Program Primary Remote to Additional Receiver
NOTE: Be sure that only the Remote that you are working with is
powered up.
a. Power on both Additional Receiver and Primary Remote
b. On Remote tap
Program
button once, indicator light will flash fast green.
c. Use the Select button to select one of the 10 programmable locations.
d. On Additional Receiver, press and hold
Programming
button until both
Remote and Additional Receiver slow flash green at the same rate.
e. Remote and Additional Receiver are now programmed.
Caution: If TARP function is selected the previous receiver will be
overwritten.
STEP 1
STEP 2
