7
INSTALLING THE DIAMOND BLADE
-ENSURE THAT TOOL IS DISCONNECTED FROM
POWER SOURCE.
TO INSTALL THE BLADE
1.
Remove any accumulated debris in the
guards and around the arbor.
2.
First mount the Inner Flange, then the blade,
making sure the direction of rotation arrow
of the blade and the arrow on the machine
are in the same direction.
3.
Mount the Outer Flange, Washer and Arbor
Bolt. See Fig.2.
NOTE: Use blades that have an arbor bore which
can fit, and that are rated for the machine’s
maximum rated speed or higher.
REMOVING THE BLADE
-
DISCONNECT TOOL
FROM POWER SOURCE.
Removal is the opposite of installing the blade.
TO ADJUST DEPTH OF CUT-
DISCONNECT
TOOL FROM POWER SOURCE.
TO ADJUST THE DEPTH OF CUT
Loosen the Depth Stop Lever by pushing it
forwards and adjust the depth of cut to the desired
amount. Then retighten the Depth Stop Lever. See
Fig.3.
HOW TO USE THE SIGHTING NOTCH
To aid in free-hand cutting, sighting notches are
located at the front of the base plate.
See Fig.4.
Depth Stop
Lever
Depth Scale
Sighting notches
Outer Flange
Inner Flange
Blade
Arbor Bolt &
Washer
Fig.2
Fig.3
Fig.4
