8
VACUUM DUST COLLECTION
There is a vacuum port provided on the blade
cover to collect dust when operating.
Simply attach the vacuum cleaner hose to the
vacuum port. See fig. 5. Keep the Cap in place
when not in use.
WATER FEED SYSTEM
WARNING: This machine is equipped with a
Portable Residual Current Device (PRCD) also
known as a Ground Fault Circuit Interrupter
(GFCI). Always use this device whenever using
the machine to reduce the risk of shock
hazards. Always position the device PRCD as
close as possible to the power source.
Test the PRCD device before each use.
Press the “Test” button to test. Press the “Reset”
button to energize the circuit to the machine.
WARNING: Never use the machine without the
PRCD fault-current safety switch supplied.
WARNING: Check all connections of the water
feed system to ensure there are no leaks.
Inspect hoses and other critical parts which
could deteriorate.
WARNING: If you detect a leak in any part of the
water supply system, shut the machine down
immediately and repair the fault.
WARNING: The maximum water pressure should
not exceed 70 psi (4 bar).
The water feed system allows the machine to cut
more effectively. Ensure that a PRCD interrupter
unit is always used.
Mount the Quick Release Water Coupling to the
water supply hose. Adjust the Water Valve for the
desired amount of water flow.
See Fig.6.
WARNING: Great care must always be taken to
avoid the risk of electrocution whenever using
water. Never allow water to contact the
electrical parts of the tool.
Always use a PRCD Interrupter.
PARALLEL GUIDE
The Parallel Guide allows straight cuts to a desired
Vacuum Port Cap
Fig.5
Quick-release water hose coupling
Fig.6
Water Valve
Cover
Test Button Reset Button
On Lamp