Agora Models SHELBY COBRA 1965, Инструкции по сборке

Страница: 3 / 31

3
AGORA MODELS
S T E P 1
S T E P 2
1
2
3
1
2
A S S E M B L E T H E R E A R L OW E R A R M
Fit the Shock Absorber Piston to the Lower Control
Arm as shown. Secure the parts together with a
TYPE 8 mm pin. Hold the pin at the ridged end
and push it through the pin holes, leaving the
ridged end protruding. With the parts correctly
in position, squeeze the pin with pliers to fully
insert. The process for securing pins is the same
throughout the build unless instructed otherwise.
AT TA C H T H E S H O C K A B S O R B E R
C Y L I N D E R
Fit the Shock Absorber Cylinder from below, into
position on the Front Suspension Support as
shown. Fix in place with a TYPE 12 mm pin.
Stage 32: Rear Right Lower Control Arm
1 x 8 mm PIN
1 x 12 mm PIN