Agora Models SHELBY COBRA 1965, Инструкции по сборке

Страница: 5 / 31

5
AGORA MODELS
S T E P 4
1
2
3
4
AT TA C H T H E W H E E L H U B
Finally, align the free end of the Right Drive Shaft
with the Wheel Hub from Stage 31. Push the claw
grip over the Wheel Hub. Wiggle into position
and ensure that the grip tucks behind the brake
caliper screw. Check that the pin holes are all
aligned and push a TYPE 10 mm pin through the
claw grip. Once in place, squeeze the pin with
pliers to fully insert.
Fix the Upper Control Arm to the Wheel Hub
bracket using a TYPE 14.5 mm pin, and finish
by fixing the Lower Arm to the Wheel Hub with
another TYPE 14.5 mm pin.
Stage 32: Rear Right Lower Control Arm
1 x 10 mm PIN
2 x 14.5 mm PIN