AGM Global Vision VICTRIX, Руководство пользователя

Страница: 22 / 36

22 AGM Global Vision
MANUAL FOR ELECTRONIC ACCURACY CORRECTION
1) Aim your day scope to the middle of target and shoot. This action will test the control of day
scope accuracy.
2) Mount the Victrix on the riflescope. Aim to the target and shoot again.
3) Measure horizontal (x) and vertical distance (y) between shoot and aiming position from step 2.
4) Press Up button within few seconds to enter the main menu, and you will see the Alignment
Correction as the last icon of the menu.
Press Up button to enter this sub-menu.
5)Press Left or Right button to move between X, Y and EXIT. Press Up button to change positive
value (X+, Y+), and press Down button to change negative value (X-, Y-).
6) Press EXIT, Up or Down button to save settings.
7) Check if the value was saved correctly.
After mounting of clip-on to the weapon with day scope the clip-on optical axis can be offset off
scope optical axis.
Enter submenu of “Alignment” with a short press of Up/Down and you will see:
If the red cross mark of clip-on does not match with central mark of day scope reticle you need
shift the image to align the marks.
While using the Alignment Correction is shown value of axis X (horizontal) and Y (vertical), one
step means 0.58 MOA (1.67cm on 100m) for horizontal alignment and 0.4 MOA (1.7cm on 100m)
for vertical alignment.