Agio 361198, Руководство по сборке

Страница: 11 / 23

11
MAINTENANCE
The flames should look like those in Figure 13. To clean
the burner,
use a soft brush after the burner has cooled
completely. Never use a vacuum cleaner on the burner. It
is recommended to store the fire pit indoors during winter
if it will be subjected to freezing temperatures. The LP
cylinder must be disconnected and removed from the
appliance before the appliance can be stored indoors.
Figure 13
LIGHTING INSTRUCTIONS
Warning: If these instructions are not followed exactly, a fire or explosion may result causing
property damage, personal injury, or loss of life.
1. Read instructions before lighting.
2. Push and turn the knob to ON.
3. Hold ignitor to light the burner, release control knob after 15 seconds; if burner does not
light , wait 5 minutes ,repeat.
4. Adjust flame to desired flame with the control knob. See Figure 14.
BURNER COVER ASSEMBLY
Place the burner cover on the table top as shown in
Figure15.
WARNING: BEFORE PLACING THE BURNER COVER ON,
MAKE SURE THE FIREPIT HAS BEEN SHUT OFF AND THE
BURNER HAS COMPLETELY COOLED DOWN.
Figure 15
IGNITER BUTTON CONTROL KNOB Figure 14