Agio 361198, Руководство по сборке

Страница: 6 / 23

6
X FIREPIT BASE FP3733 1
Y FIREPIT TABLE LEG FP3734 2
Z
LEG CONNECTOR
BRACKET
FP3735 2
AA
BURNER PAN PROTECTIVE
RING
FP3736 1
BB BURNER COVER FP3737 1
CC
FIREPAN/BURNER
ASSEMBLY
FP3738 1
DD ORIFICE HOLDER FP3573 1
INSTALLATION
1. Carefully unpack all items from the box. Place the base in the final position. There must be a
minimum of 60.96 cm / 24 inches of clearance from the side of the table top to any combustible
walls.
2.
Attach a leg connector bracket to a table leg by using two 1/4"x20 mm bolts and Ø6.5x1.0
mm washers as shown in Figure 2. Guide the bolts through the holes in the leg connector
bracket, into the pre-drilled holes in the table leg. Hand tighten only 2-3 turns. Repeat for the
other leg and leg connector bracket.
Figure 2