Agilent Technologies SPS 4, Руководство пользователя

Страница: 33 / 98

Installation 3
Agilent SPS 4 Autosampler User’s Guide 33
The unit should be lifted/moved from the positions shown in Figure 4 .
One person should be at the front and one person should be at the rear of
the unit. Bend at the knees if lifting from a low position.
Figure 4 Lifting positions for removing the autosampler from shipping carton
Place the unit on a suitable bench and check all of the items you have
received against the packing list. A typical autosampler configuration
could include the following items:
• Spill tray
• Rack location mat
• Sample probe *
• Standards rack *
• Sample racks *
• Wash reservoir kit *
• Communications cable (USB) *
• Power supply cable including an AC adapter (as appropriate for your
location) **
• Tubing (including 3- bridge pump tubing) *
*: These items are packed in an accessory kit box.
**: This item is packed in another box.
At least one
person lifting
from rear.
At least one
person lifting
from front.
Note: Remove
these plastic
inserts before
lifting unit.