10
QuickSwap Installation and Startup
Plumbing the Purge Gas
9
If the tubing is not already capped, cover the free end to keep insulation out
of the tubing.
10
Use a screwdriver to create a hole through the insulation and into the GC
oven.
11
Feed the tubing down through the hole and into the oven.
12
Re-install the covers.
13
Remove the protective cap from the end of the tubing and attach the
reducing union from the kit.
14
Bend the tubing neatly into the left back corner of the oven, leaving enough
tubing inside the oven so you can later connect to the QuickSwap union.
15
Push excess tubing up on top of the oven and arrange neatly.
