Agilent Technologies N2792A, Руководство пользователя

Страница: 5 / 36

5
Handling the Probe
Handle the probe with care and refer to the safety notices in this manual.
Note that the probe cable is a sensitive part of the probe and, therefore,
you should be careful not to damage it through excessive bending or
pulling. You should also avoid any mechanical shocks to this product in
order to guarantee accurate performance and protection.
Cleaning the Probe
Disconnect the probe from the oscilloscope and clean the probe with a soft
cloth dampened with a mild soap and water solution. Make sure that the
probe is completely dry before reconnecting it to an oscilloscope. Avoid
using abrasive cleaners and chemicals containing benzene or similar
solvents.
Inspecting the Probe
■
Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the
contents of the shipment have been checked for completeness and the
probe has been checked mechanically and electrically.
■
Check the accessories.
■
If the contents are incomplete or damaged, notify your Agilent
Technologies Sales Office.
■
Inspect the instrument.
■
If there is mechanical damage or defect, or if the probe does not operate
properly or pass calibration tests, notify the Sales Office.
If the shipping container is damaged, or the cushioning materials show
signs of stress, notify the carrier as well as the Sales Office. Keep the
shipping materials for the carrier’s inspection. The sales office will arrange
for repair or replacement at Agilent Technologies’ option without waiting
for claim settlement.