Agilent Technologies M1205A V24, Руководство по обслуживанию

Страница: 147 / 358

Troubleshooting Plug-in Modules 5-9
$JLOHQW0$996HULHV6HUYLFH*XLGH
T
r
ou
b
le
s
ho
ot
in
g P
lu
g
-
in
Mo
du
les
❏
If a
"LQVWHDGRIDQXPHULF
and one or more INOP messages are displayed for the
ECG/RESP module, perform the following actions:
3OHDVHQRWHWKDWIRUSURFHHGLQJWRWKHQH[WVWHSVDWUXQNFDEOHZLWKOHDGVHWPXVWEH
FRQQHFWHGWRWKHPRGXOH
6WHS
Perform a module self-test (See “Performing the ECG or ECG/RESP Module Self-
Test” on page 5-42). If the ECG/RESP test numerics read exactly the listed values,
proceed to the next step, if not, replace the module.
6WHS
Refer to the following table. Correct the possible cause identified by the INOP
message and verify that the INOP disappears. If the problem still exists, replace the
module.
7DEOH,1230HVVDJHVIRU(&*DQG(&*5HVS
,1230HVVDJH 3RVVLEOH&DXVH &RUUHFWLYH$FWLRQ
LEADS OFF Not all required leads are attached
or electrodes have been displaced.
With activated EASI
TM
option the
wrong lead set is used.
Lead set or ECG Module may be
defective.
Make sure all electrodes are correctly
attached.
With activated EASI
TM
option make
sure you are using the correct (5 elec-
trode) lead set.
If INOP still is displayed, change lead
set.
If INOP persists, replace module.
LEADS OFF XX Single electrode from lead xx
detached. Attach the missing electrode.
If INOP still is displayed, see Correc-
tive Action for “LEADS OFF”
LEADS OFF (EL.X) Single electrode from lead E,S or I
is detached (EASI
TM
lead set).
Attach the missing electrode.
If INOP still is displayed, see Correc-
tive Action for “LEADS OFF”
ECG/RESP
UNPLUGGED ECG/RESP module is unplugged
from the rack. Perform Step 5 on page 5-8.
ECG EQUIP MALF Malfunction in ECG hardware. Replace module.
ECG/RESP
UNPLUGGED ECG/RESP module is unplugged
from the rack. Perform Step 5 on page 5-8.
RESP LEAD OFF RESP lead is off, electrode
detached, or patient cable
unplugged. Make sure all electrodes are correctly
attached.
If INOP still is displayed, change lead
set.
If INOP persists, replace module.
RESP EQUIP MALF Malfunction in RESP hardware. Replace module.