Agilent Technologies M1205A V24, Руководство по обслуживанию

Страница: 126 / 358

$JLOHQW0$996HULHV6HUYLFH*XLGH
8VLQJ6XSSRUW )XQFWLRQV
Using
S
u
pp
or
t
F
u
n
c
t
io
n
s
&ROG6WDUW
'XULQJDFROGVWDUWWKH6\VWHP%RDUGUXQVDGHWDLOHGWHVWRIPHPRU\ZKLFKHUDVHVWKH
V\VWHPGDWDEDVHIRUSDWLHQWGDWDPDQDJHPHQW$OODFWLYHVHWWLQJVDQGSDWLHQWGDWDDUH
ORVW
All user default values for configurable items, including parameter module settings, are
restored and an extensive self-test is carried out.
When Settings Transfer is configured to ON, patient-related settings are recovered from the
module front-end’s non-volatile memory. The system database for patient data management
is cleared. Leaving the Demo Mode causes a cold start. A cold start usually requires between
12 and 15 seconds before the Monitoring Mode is activated.
([WHQGHG7HVW
'XULQJWKHH[WHQGHGVHOIWHVWWKH6\VWHP%RDUGUXQVDGHWDLOHGPHPRU\WHVWZKLFK
HUDVHVWKHV\VWHPGDWDEDVHIRUSDWLHQWGDWDPDQDJHPHQW$OOSDWLHQWGDWDLVORVWDVWKH
PHPRU\WHVWLVHTXLYDOHQWWRDFROGVWDUW
This test is not performed during the standard boot process but is a software switch that can
be selected in the Service Mode. (Press the “Monitor Setup” hardkey, and then the “Power-
On Modes” softkey.)
When all components are tested successfully, the extended test takes between 2 and 2½
minutes to complete, and the upper limit is 255 seconds. An error message is directly
displayed at the top of the screen when problems occur during the Extended test. After the
test, inspect the Status Log for any device IDs and error codes generated.
;6WDUW
During an X-start, the system reacts as after a cold start, the only difference being that the
user default settings of the Monitor are downloaded to the EEPROM of the modules. An X-
start occurs after changing operating mode or configuration set.
127(
Modules that are plugged in the System within 30 seconds after an “X-Start” is initiated, will
receive the user default settings of the Agilent Monitor. Modules that are plugged in > 30
seconds after an X-Start is initiated will transfer the stored patient settings to the instrument.
&$87,21
&$87,21