manualshive.com logo in svg

Agilent Technologies Infiniium 8000A, Руководство программиста

Продукт Agilent Technologies Infiniium 8000A - это мощный осциллограф с широким функционалом. Для полноценного использования устройства необходимо ознакомиться с Programmer'S Reference Manual, который можно загрузить бесплатно с нашего сайта manualshive.com. Получите доступ к руководству прямо сейчас!

Поделиться
Скачать
background image

Notices

© Agilent Technologies, Inc. 

2005-2006

No part of this manual may be 
reproduced in any form or by 
any means (including electronic 
storage and retrieval or transla-
tion into a foreign language) 
without prior agreement and 
written consent from Agilent 
Technologies, Inc. as governed 
by United States and interna-
tional copyright laws.

Manual Part Number

D8064-97004, December  2006

Print History

D8064-97004, December  2006
D8064-97003, June  2006
D8064-97001, December  2005

Agilent Technologies, Inc.
1601 California Street 
Palo Alto, CA 94304 USA

Restricted Rights Legend

If software is for use in the per-
formance of a U.S. Government 
prime contract or subcontract, 
Software is delivered and 
licensed as “Commercial com-
puter software” as defined in 
DFAR 252.227-7014 (June 1995), 
or as a “commercial item” as 
defined in FAR 2.101(a) or as 
“Restricted computer software” 
as defined in FAR 52.227-19 
(June 1987) or any equivalent 
agency regulation or contract 
clause. Use, duplication or dis-
closure of Software is subject to 
Agilent Technologies’ standard 
commercial license terms, and 
non-DOD Departments and 
Agencies of the U.S. Govern-
ment will receive no greater 
than Restricted Rights as 
defined in FAR 52.227-19(c)(1-2) 
(June 1987). U.S. Government 
users will receive no greater 
than Limited Rights as defined in 
FAR 52.227-14 (June 1987) or 
DFAR 252.227-7015 (b)(2) 
(November 1995), as applicable 
in any technical data.

Document Warranty

The material contained in 
this document is provided 
“as is,” and is subject to 
being changed, without 
notice, in future editions. 
Further, to the maximum 
extent permitted by applica-
ble law, Agilent disclaims 
all warranties, either 
express or implied, with 
regard to this manual and 
any information contained 
herein, including but not 
limited to the implied war-
ranties of merchantability 
and fitness for a particular 
purpose. Agilent shall not be 
liable for errors or for inci-
dental or consequential 
damages in connection with 
the furnishing, use, or per-
formance of this document 
or of any information con-
tained herein. Should Agi-
lent and the user have a 
separate written agreement 
with warranty terms cover-
ing the material in this docu-
ment that conflict with these 
terms, the warranty terms in 
the separate agreement 
shall control.

Technology Licenses 

The hardware and/or software 
described in this document are 
furnished under a license and 
may be used or copied only in 
accordance with the terms of 
such license.

WARNING

A WARNING notice 
denotes a hazard. It calls 
attention to an operating 
procedure, practice, or 
the like that, if not 
correctly performed or 
adhered to, could result 
in personal injury or 
death. Do not proceed 
beyond a WARNING 
notice until the indicated 
conditions are fully 
understood and met.

CAUTION

A CAUTION notice 
denotes a hazard. It calls 
attention to an operating 
procedure, practice, or 
the like that, if not 
correctly performed or 
adhered to, could result in 
damage to the product or 
loss of important data. Do 
not proceed beyond a 
CAUTION notice until the 
indicated conditions are 
fully understood and met. 

Trademark Acknowledgements

Windows and MS Windows are 
U.S. registered trademarks of 
Microsoft Corporation.

Содержание Infiniium 8000A







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Infiniium 8000A

ABB Navigator 550 Manual preview
Navigator 550
Бренд: ABB Страницы: 6
Gardena 1407 Operator'S Manual preview
1407
Бренд: Gardena Страницы: 13
AccuMed CMS-50D Manual preview
CMS-50D
Бренд: AccuMed Страницы: 14
TAS 3012 User Manual preview
3012
Бренд: TAS Страницы: 25
Dana Design ArcLight Quick Start Instructions preview
ArcLight
Бренд: Dana Design Страницы: 20
Jackco 852 User Manual preview
852
Бренд: Jackco Страницы: 6
Haag-Streit BQ 900 Instructions For Use Manual preview
BQ 900
Бренд: Haag-Streit Страницы: 18
Haag-Streit IM 900 Instruction Manual preview
IM 900
Бренд: Haag-Streit Страницы: 20
V-TEK PT-55 Quick Start Manual preview
PT-55
Бренд: V-TEK Страницы: 2
V-TEK PT-55 User Manual preview
PT-55
Бренд: V-TEK Страницы: 112
Hantek DPO6000 Series Product Manual preview
DPO6000 Series
Бренд: Hantek Страницы: 124
Hameg HO720 Installation Manuallines preview
HO720
Бренд: Hameg Страницы: 10
Wahl 1911 Quick Manual preview
1911
Бренд: Wahl Страницы: 2
JBL Synthesis SDEC-3000 Calibration Manual preview
Synthesis SDEC-3000
Бренд: JBL Страницы: 24
Xilica Audio Design XP series User Manual preview
XP series
Бренд: Xilica Audio Design Страницы: 30
Kamikaze KV 4 User Manual preview
KV 4
Бренд: Kamikaze Страницы: 112
KAM LED PAR 56 Product Manual preview
LED PAR 56
Бренд: KAM Страницы: 2
LANGER EMV-Technik P1401 User Manual preview
P1401
Бренд: LANGER EMV-Technik Страницы: 25

Бренды по названию

Популярные бренды

Загрузить еще бренды