Agilent Technologies Infiniium 8000A, Руководство программиста

Страница: 117 / 934

6-23
Sample Programs
learnstr.c Sample Program
learnstr.c Sample Program
/* learnstr.c */
/*
* This example program initializes the 8000A oscilloscope, runs autoscale to
* acquire a waveform, queries for the learnstring, and stores the learnstring
* to disk. It then allows the user to change the setup, then restores the
* original learnstring. It assumes that a waveform is attached to the
* oscilloscope.
*/
#include <stdio.h> /* location of: printf(), fopen(), fclose(),
fwrite(),getchar */
#include "gpibdecl.h"
void initialize( void );
void store_learnstring( void );
void change_setup( void );
void get_learnstring( void );
void main( void )
{
if( init_IO( ) ) /* initialize device and interface */
{ /* Note: routine found in sicl_IO.c or natl_IO.c */
/* initialize the oscilloscope and interface, and set up SRQ */
initialize( );
store_learnstring( ); /* request learnstring and store */
change_setup( ); /* request user to change setup */
get_learnstring( ); /* restore learnstring */
close_IO( ); /* close device and interface sessions */
/* Note: routine found in sicl_IO.c or natl_IO.c */
}
} /* end main */