Agilent Technologies E4438CK-601, Установочная инструкция

Страница: 4 / 16

4
Installation Kit Parts List
a. This item cannot be ordered separately.
b. Must be ordered separately if installed by the Agilent Service Center.
NOTE
For instruments with serial numbers >US4426/MY4426 an entitlement certificate is
required to redeem the license key and enable the option.
IMPORTANT If the Agilent Service Center orders the Option 601 or 602 upgrade kit using the 5x5 part
number, then they must contact Agilent and order the entitlement certificate.
Item Quantity Description Part Number
1 1 Installation Note E4400-90585
2 1 ESG-C Firmware Upgrade Kit E4400-60597
3 1 A25 Rear Panel Board E4400-60655
4 1 W92 Digital Bus Cable 8121-0690
5 1
Digital Bus Cable Retainer
a E4400-00546
6 1
Digital Bus Label
a E4400-80545
7 1 W10 AUX I/O Cable 8121-0679
8 1 W12 BNC Cable (Baseband Generator Reference IN) 8121-0643
9 2 Screw SMM 3.0x8 for Digital Bus Cable Retainer 0515-0372
10 5 Hex Nut 15/21-32 (AUX I/O) 2950-0035
11 5 Washer .4721D (BNC) 2190-0102
12 2 Washer LK .115ID (AUX I/O) 2190-0003
13 2 Screw .312HX4 (AUX I/O) 0380-2079
14 2 Screw LK 2.5X6MM (Digital Bus) 0515-4439
For Option 601 (8 Msamples) with serial numbers
<
MY4426/US4426
15 1 A7 Digital Bus Baseband Generator 8 Msample E4400-60759
16 1 Option 601 Label 7120-1232
For Option 602 (64 Msamples) with serial numbers < MY4426/US4426
15 1 A7 Digital Bus Baseband Generator 64 Msample E4400-60760
16 1 Option 602 Label 7120-1232
For Option 601 (8 Msamples) or Option 602 (64 Msamples) with serial numbers
≥
MY4426/US4426
17 1 A7 Digital Bus Baseband Generator (Firmware configured with
License Key) E4400-60761
18 1 Option 601 or Option 602 Label 7120-1232
19 1
Entitlement Certificate
b 5964-5143