Agilent Technologies E4400-60767, Инструкции по установке

Страница: 13 / 16

13
Verifying Cable Connections
Verify that all cables listed in the following table are installed and routed as shown in Figure 3 , Figure 4 ,
Figure 6 and Figure 8 .
Cable Routing (Front to Rear)
Cable Description Reference
Designator Color
Number
1
1. Cable color numbers appear in the Connector/Cable Diagram located on the top of the inside
cover of the signal generator.
Connection Point to Point
Option UN8/UN9 Only ( Figure 6 on page 12 )
Ribbon Cable Interconnect W19 - A7P300 to A8P3
Ribbon Cable Interconnect W27 - A7P10 to A8P4
BASEBAND GENREF IN W15 8 Rear Panel to A7P403
Q OUT W16 9 Rear Panel to A7P404
I OUT W17 09 Rear Panel to A7P405
DATA W3 5 Front Panel to A14P5
SYMBOL SYNC W5 6 Front Panel to A14P7
DATA CLOCK W4 7 Front Panel to A14P6
Rear Panel Interface Cable W18 - Rear Panel Interface (A17) to A8P2
INT Q W25 05 Daughterboard (A15) to A14P103
INT I W26 06 Daughterboard (A15) to A14P102
Option UN8/UN9 & Option UN7 (Option UN7 Connections, Figure 4 on page 8 )
Ribbon Cable BERT, Rear Panel A18W1 Rear Panel to A6P4
BER GATE IN W21 Rear Panel to A6P3
BER CLK IN W22 Rear Panel to A6P2
BER DATA IN W23 Rear Panel to A6P1
Option UN8/UN9 & Option UND (Option UND Connections, Figure 3 on page 8 )
13 MHz W24 A5J4 to A7P403
BASEBAND GEN REF W15 Rear Panel to A5J3
Q OUT W16 Rear Panel to A5J2
I OUT W17 Rear Panel to A5J1
Rear Panel Interface Cable W18 Rear Panel Interface (A17) to A5P1