Agilent Technologies E1472A, Руководство пользователя

Страница: 15 / 70

14 Getting Started
Chapter 1
Figure 1-2. Card Numbers for Multiple-Module Switches
Module Numbers
The module number identifies the module (RF Multiplexer, Expander #1, or
Expander #2) within the card. The number depends on the desired module
(RF Multiplexer, Expander #1, or Expander #2). Figure 1-3 illustrates the
module numbers of a typical card.
•
RF Multiplexer.
Module number is 00. If the RF Multiplexer does
not have Expander module(s) connected, the module number can
be omitted.
•
Expander module #1.
Module number is 01. Used to select the
Expander module (if installed) connected to the RF Multiplexer
RMD 3/RMD 2 internal ribbon connector.
•
Expander module #2.
Module number is 02. Used to select the
Expander module (if installed) connected to the RF Multiplexer
RMD 5/RMD 4 internal ribbon connector.
RF Multiplexer Module
but is recommended.
Logical Address Order is not required,
Physical placement of the Module in the
RF Multiplexer Module
Logical Address 121
NOTE:
Secondary Address 15
Logical Address 128
Command Module
CARD NUMBER 02
CARD NUMBER 01
Secondary Address 15
Logical Address 120
RF Multiplexer Module
Multiple Module Switch Box Card Numbers
CARD NUMBER 09
CARD NUMBER 08
Logical Address 127
RF Multiplexer Module
Figure 1-3. Typical Module Numbers
Command Module
RF Multiplexer Module
CARD NUMBER 01 MODULE #00
CARD NUMBER 01 MODULE #01
Expander Module #01
Physical placement of the Module in the
Logical Address Order is not required,
but is recommended.
NOTE:
Module Numbers
CARD NUMBER 01 MODULE #2
Expander Module #02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com