manualshive.com logo in svg

Agilent Technologies aurora Duet, Руководство пользователя

Поделиться
Скачать
Agilent Technologies aurora Duet Скачать руководство пользователя страница 30

2 - 4

428856

aurora

Duet

 Basic & Primary Rate ISDN Tester - User Guide

Dirty contacts will cause intermittent malfunctions of
aurora

Duet

. Before you refit a battery pack, check that the

contacts are clean and, if necessary, brush any deposits
clear using a cloth or tissue. Keep spare battery packs in
the carrying case when not in use. The battery packs are
factory-sealed and must not be opened.

To refit the battery pack, gently slide it into the unit,
contacts first. The correct end of the battery to insert first
is rounded on one edge and flat on the other edge. The
flat edge should line up with the flat side of aurora

Duet

.

Firmly secure the cover, ensuring the battery pack release
is firmly engaged.

Do not short circuit battery contacts.

Recharging the main battery pack

1.

Check that the battery pack is completely
discharged. All Nickel-Cadmium cells exhibit a
‘memory’. This means that if a partially discharged
battery is recharged, some of the capacity of the
battery is lost. We recommend that battery packs
are discharged completely before recharging.

It is also possible to operate 

aurora

Duet

 from an

external power source. Simply remove the battery
pack as described in 

Replacing the Battery Pack

above, and secure the cover. Store the unused
battery pack in the carrying case.

2.

Plug the adaptor/charger into the DC input socket.

aurora

Duet

 can be switched on and used while the

battery pack is being recharged, if required.

Note:

You will find a diagram of the 

aurora

Duet

communications ports and connectors, showing the
location of the external DC supply, in Chapter 3.

Содержание aurora Duet













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды