Agilent Technologies aurora Duet, Руководство пользователя

Страница: 180 / 236

aurora
Duet
Basic & Primary Rate ISDN Tester - User Guide
10 - 4 428856
F5
SPID
Allows you to select a Service Profile ID
(SPID) to use for the call. By pressing
F5 you can switch between SP1 and
SP2. The current selection is displayed
at the top of the screen.
For information on how to set up
SPIDs, see Chapter 9.
F6
EXIT
Returns you to the
MAIN
menu.
Setting up an outgoing call
The way in which you set up an outgoing call will depend
upon:
• the bearer capability or service you are using
• the way in which dialing is set up—i.e. Overlap or
En Bloc
When you select a bearer capability or service from the
CALL SETUP
menu:
• For all types of call except
DATA Nx64K
, aurora
Duet
displays the
DIAL
screen.
• For
DATA N*64K
calls, which are used for BERT
on multiple channels, before the
DIAL
screen
aurora
Duet
displays the
BERT CHANNELS
screen, for
you to set up the channels on which BERT is to be
performed. When you have set up the channels,
aurora
Duet
proceeds to the
DIAL
screen.
Note:
You can only make
DATA Nx64K
calls when using the
Nortel or NI protocols, in PRI mode.