Agilent Technologies 9191610, Руководство пользователя

Страница: 53 / 98

Installation Procedure
Operating Procedure
4
VacIon Plus 300 pumps User Manual / 87-900-103-01 (H) 53/98
NOTE
The steps on the pressure – current charts are a characteristic of the Agilent
controller with “step mode” operation. When the current drawn by the VacIon
pump reaches the specified values, the controller will change the high voltage
output to a lower applied voltage.
7
When venting the pump, use dry nitrogen. This will avoid water
vapor absorption on the pump walls.
WARNING! When employing the pump for pumping toxic, flammable, or radioactive
gases, please follow the required procedures for each gas disposal. Do not
use the pump in presence of explosive gases.
WARNING! When the heating element is installed, do not touch the pump during the
heating and cooling phases. The high temperature may cause a serious
damage.
CAUTION!
Do not put any electronic device near the pump otherwise the magnetic field
around it may cause a device malfunctioning.