Agilent Technologies 9191610, Руководство пользователя

Страница: 46 / 98

4 Installation Procedure
General Information
46/98 VacIon Plus 300 pumps User Manual / 87-900-103-01 (H)
General Information
This equipment is destined for use by professionals. The user should
read this instruction manual and any other additional information
supplied by Agilent before operating the equipment. Agilent will not
be held responsible for any events occurring due to non-compliance,
even partial, with these instructions, improper use by untrained
persons, non-authorized interference with the equipment or any
action contrary to that provided for by specific national standards.
The VacIon Plus series pumps are ion pumps commonly used to
create ultra-high vacuum, due to their cleanliness, ability to pump
different gases, and maintenance- and vibration-free operation.
The following paragraphs contain all the information necessary to
guarantee the safety of the operator when using the equipment.
Detailed information is supplied in the appendix "Technical
Information".
This manual uses the following standard protocol:
WARNING! The warning messages are for attracting the attention of the operator to a
particular procedure or practice which, if not followed correctly, could lead to
serious injury.
CAUTION!
The caution messages are displayed before procedures which, if not followed,
could cause damage to the equipment.
NOTE
The notes contain important information taken from the text.