Agilent Technologies 86121A, Руководство пользователя, Страница: 69 / 240

4
-
2 Programming
Programming
This chapter explains how to program the
Agilent 86121A. The programming syntax conforms to
the IEEE 488.2 Standard Digital Interface for Program-
mable Instrumentation and to the Standard Commands
for Programmable Instruments (SCPI).
Where to begin…
The programming examples for individual commands in
this manual are written in HP BASIC 6.0 for an HP 9000
Series 200/300 Controller.
For more detailed information regarding the GPIB, the
IEEE 488.2 standard, or the SCPI standard, refer to the
following books:
Hewlett-Packard Company. Tutorial Description of
Hewlett-Packard Interface Bus, 1987.
Hewlett-Packard Company. SCPI—Standard Com-
mands for Programmable Instruments, 1995.
International Institute of Electrical and Electronics En-
gineers.
IEEE Standard 488.1-1987, IEEE Standard
Digital Interface for Programmable Instrumentation.
New York, NY, 1987.
International Institute of Electrical and Electronics En-
gineers.
IEEE Standard 488.2-1987, IEEE Standard
Codes, Formats, Protocols and Common commands
For Use with ANSI/IEEE Std 488.1-1987.
New York,
NY, 1987.
Types of commands
The Agilent 86121A responds to three types of com-
mands:
• Common commands
• Measurement instructions
• Subsystem commands
All of these commands are documented in Chapter 5,
“Programming Commands” .