6
85130C Operating and Service Manual
Equipment and Supplies
The following equipment and supplies are required for the maintenance and use of, but are not supplied
with, your 85130C adapter. kit.
Contacting Agilent
Assistance with test and measurement needs and information on finding a local Agilent office are available
on the Web at:
www.agilent.com/find/assist
NOTE
In any correspondence or telephone conversation, refer to the Agilent product by its model
number and full serial number. With this information, the Agilent representative can
determine whether your product is still within its warranty period.
Item
Part Number
3.5 mm gage kit (part of the 85052B calibration kits)
85052-80010
Type-N gage kit (part of the 85054B calibration kit)
85054-80011
Torque wrench, 3/4”, 136 N-cm (12 in-lb) (part of the 85054B calibration kit)
8710-1766
Torque wrench, 20 mm, 96 N-cm (8 in-lb)
8710-1764
Document:
Connector Care for RF and Microwave Coaxial Connectors
08510-90064