manualshive.com logo in svg

Agilent Technologies 85024A, Руководство пользователя и сервисное руководство

Поделиться
Скачать
Agilent Technologies 85024A Скачать руководство пользователя страница 2

 

ii

 

 

Warranty

This product is warranted against defects in material and workmanship for a period of one year from date 
of shipment. During the warranty period, Agilent Technologies will, at its option, either repair or replace 
products which prove to be defective. 

For warranty service or repair, this product must be returned to a service facility designated by Agilent. 
Buyer shall prepay shipping charges to Agilent and Agilent shall pay shipping charges to return the 
product to Buyer. However, Buyer shall pay all shipping charges, duties, and taxes for products returned 
to Agilent from another country. 

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by 
Buyer, Buyer-supplied software or interfacing, unauthorized modification or misuse, operation outside 
of the environmental specifications for the product, or improper site preparation or maintenance. 

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. AGILENT TECHNOLOGIES 
SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE. 

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND EXCLUSIVE REMEDIES. 
AGILENT TECHNOLOGIES SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT, 
OR ANY OTHER LEGAL THEORY.

Assistance

Product maintenance agreements and other customer assistance agreements are available for Agilent 
products.

For any assistance, contact the nearest Agilent sales or service office. Refer to 

Table 7-1 on page 7-17

 for 

a list of Aligent offices. 

Содержание 85024A



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды