C - Error Messages
72
–171
Invalid expression
–178
Expression data not allowed
Execution Errors
–2
00 through
–2
99 (sets Standard Event Status Register bit #4)
–200
Execution error [generic]
–221
Settings conflict [check current device state]
–222
Data out of range [e.g., too large for this device]
–223
Too much data [out of memory; block, string, or expression too long]
–224
Illegal parameter value [device-specific]
–225
Out of memory
–270
Macro error
–272
Macro execution error
–273
Illegal macro label
–276
Macro recursion error
–277
Macro redefinition not allowed
System Errors
–3
00 through
–3
99 (sets Standard Event Status Register bit #3)
–310
System error [generic]
–350
Too many errors [errors beyond 9 lost due to queue overflow]
Query Errors
–4
00 through
–4
99 (sets Standard Event Status Register bit #2)
–400
Query error [generic]
–410
Query INTERRUPTED [query followed by DAB or GET before response complete]
–420
Query UNTERMINATED [addressed to talk, incomplete programming message received]
–430
Query DEADLOCKED [too many queries in command string]
–440
Query UNTERMINATED [after indefinite response]
Selftest Errors 0 through 99 (sets Standard Event Status Register bit #3)
0
No error
1
Non-volatile RAM RD0 section checksum failed
2
Non-volatile RAM CONFIG section checksum failed
3
Non-volatile RAM CAL section checksum failed
4
Non-volatile RAM WAVEFORM section checksum failed
5
Non-volatile RAM STATE section checksum failed
6
Non-volatile RAM LIST section checksum failed
7
Non-volatile RAM RST section checksum failed
10
RAM selftest
11 - 31
DAC selftest error, expected <n>, read <reading>
Errors 11, 12, 13, 14, 15 apply to DAC12 1A and 1B
Errors 16, 17, 18 apply to DAC12 2A
Errors 19, 20, 21 apply to DAC12 2B
Errors 22, 23 apply to DAC12 4A
Errors 24, 25 apply to DAC12 4B
Errors 26, 27, 28 apply to DAC12 3A and 3B
Errors 29, 30, 31 apply to DAC12 5A and 5B
40
Voltage selftest error, output 1
