Agilent Technologies 5517B, Руководство пользователя

Страница: 4 / 102

Agilent Technologies, Inc. 8.CD.L.03.11.97.R1.J.CW1FL
Santa Clara Site
5301 Stevens Creek Boulevard
Santa Clara, California 95052-8059
Certification
and Warranty
Certification
Agilent Technologies certifies that
this product met its published
specification at the time of
shipment from the factory. Agilent
further certifies that its calibration
measurements are traceable to
the United States National
Institute of Standards and
Technology (formerly National
Bureau of Standards), to the
extent allowed by the Institute’s
calibration facility, and to the
calibration facilities of other
International Standards
Organization members.
Warranty
Agilent warrants
Agilent hardware, accessories and
supplies against defects in
materials and workmanship for a
period specified by each product
from date of shipment. If Agilent
receives notice of such defects
during the warranty period, Agilent
will, at its option, either repair or
replace products which prove to
be defective. Replacement
products may be either new or
like-new.
Agilent warrants that
Agilent software will not fail to
execute its programming
instructions, for the period
specified above, due to defects in
material and workmanship when
properly installed and used. If
Agilent receives notice of such
defects during the warranty
period, Agilent will replace
software media which does not
execute its programming
instructions due to such defects.
For detailed warranty
information, see back matter.
Safety Considerations
General
This product and related
documentation must be reviewed
for familiarization with this safety
markings and instructions before
operation.
This product is a safety Class I
instrument (provided with a
protective earth terminal).
Before Applying Power
Verify that the product is set to
match the available line voltage
and the correct fuse is installed.
Before Cleaning
Disconnect the product from
operating power before cleaning.
Safety Earth Ground
An uninterruptible safety earth
ground must be provided from the
mains power source to the product
input wiring terminals or supplied
power cable.
Warning Symbols That May Be
Used In This Book
Instruction manual symbol; the
product will be marked with this
symbol when it is necessary for
the user to refer to the instruction
manual.
Indicates hazardous voltages.
Indicates earth (ground) terminal.
or
Indicates terminal is connected to
chassis when such connection is
not apparent.
Safety Considerations (contd)
Indicates Alternating
current.
Indicates Direct current.
BODILY INJURY OR DEATH
MAY RESULT FROM FAILURE
TO HEED A WARNING. DO
NOT PROCEED BEYOND A
WARNING UNTIL THE
INDICATED CONDITIONS ARE
FULLY UNDERSTOOD AND
MET.
Damage to equipment, or
incorrect measurement data,
may result from failure to heed
a caution. Do not proceed
beyond a CAUTION until the
indicated conditions are fully
understood and met.
These CAUTION labels are
required by the United States
Center for Devices and
Radiological Health. Failure to
follow their instructions may result
in personal injury.
This symbol indicates laser
radiation.
For additional safety and
acoustic noise information,
see back matter.
WARNING
CAUTION
CONTINOUS WAVE 1mW 670nm
CLASS II LASER PRODUCT
LASER RADIATION-DO NOT
STARE INTO BEAM
CAUTION