Agilent Technologies 54810A, Руководство для быстрого старта пользователя

Страница: 9 / 132

Setting Up the Oscilloscope
To inspect options and accessories
1-5
To inspect options and accessories
❏
Verify that you received the options and accessories you ordered and that
none were damaged.
If anything is missing, contact your nearest Agilent Technologiess Sales Office.
If the shipment was damaged, or the cushioning materials show signs of stress,
contact the carrier and your Agilent Technologies Sales Office.
Some of the options available for the Infiniium Oscilloscopes are listed in table
1-1. Contact your Agilent Technologies Sales Office for a complete list of
options, or look in the built-in information system under the
Accessories List
.
Table 1-1 Infiniium Oscilloscope Options
Option Description
001 Additional set of standard probes—(2) 1160A probes for the
54810A/15A/20A/25A, or (2) 1161A probes for the 54835A and 54845A
002 Add 1 1162A 1:1 passive probe
003 Add 1 1163A 10:1 500-
Ω
, low-C passive probe
006 Add one 1152A 2.5 GHz, 0.6-pF active probe (for the 54835A and 54845A only)
008 Add 1153A 200 MHz differential probe
009 Add 1154A 500 MHz differential probe
010 Add 1159A 1 GHz differential probe
015 Extended trigger for the 54810A, 54815A, 54820A, and 54825A
for the 54835A and 54845A, extended trigger comes as a standard part of the
oscilloscope
090 Delete standard probes
100 Telecommunications Mask Template Kit
106 BenchLink Scope Software (34810B version 1.6 or later)
200 VoiceControl
1BP MIL-STD-45662A and ANSI/NCSL Z-540 calibration with test data
1CM Add 1 Rackmount kit (E2609A)
AB0 Taiwan User’s Quick Start Guide
AB1 Korea User’s Quick Start Guide
AB2 PRC User’s Quick Start Guide
ABD German User’s Quick Start Guide