AGFEO DECT 50, Руководство пользователя

Страница: 42 / 44

42
DECT 50
Important Information regarding
Pairing Function
- The DECT 50 will also display the set/enabled features of the ST 40 once the handsets have
been paired.
Exceptions: EIB objects, relays and sensors will NOT be displayed. These functions may be
programmed separately for the DECT 50.
- All switchboard functions can be setup via the ST 40, this system menu will be hidden from
view on the DECT 50.
Using the meter mode you are able to define the reception area of your DECT 50.
Follow the steps below to enable the meter mode of your DECT 50:
Meter Mode
AGFEO DECT 50
Menu
Status
Phone Book
Setup
AGFEO DECT 50
Status
Software Version
Metering Mode
Press for 2 seconds
"Status"
"Meter Mode"
Press "Back" 2 times
Select
Select
Menu
Back
To switch off the meter mode follow the instruction above and deselect "Meter Mode".
AGFEO DECT 50
RPN: 05 02 04
RSS: 86 71 65
01 64 88 7A
08:30
(
(
.
)
)
Index of the additional base/repeater received
Field strength of the additional base/repeater
Meter value of the currently used base / repeater
Note:
A good radio coverage is provided with a reception quality of between 60 to 64 and a field
strength between 76 to 99.
The RPN and RSS fields remain empty when used as single cell without repeater.
With the receiver off hook the meter value displayed will be more detailed and faster updated.
Combination of fequency channel and time slot
Field strength (00..99)
Reception quality (00..64)
Index currently used base/repeater