41
DECT 50
Pairing Setup
The pairing function has to be set up before you can use this feature between the telephones.
The setup can either be carried out on the ST 40, or if preferred, by using TK-Suite Set.
By following the procedure below you can setup the Pairing Function on your ST 40:
Setup pairing function by using TK-Suite Set:
In TK-Suite select "Extensions / Devices: Digital System Phones" and select the required
DECT 50 as headset for your ST 40. Click on "Apply" to send the new setting into the telephone
system. The pairing function is now enabled.
!9#714
y&
y&
!
Initiate
programming
Select "Register" and confirm
by pressing "OK"
Select the required
DECT 50 and confirm
by pressing "OK"
End programming
The phones are now paired and the feature can be used.
To disable the pairing function carry out the following on your ST 40:
Initiate
programming
Select "Undo" and confirm by
pressing "OK"
End programming
You may also undo the pairing function by using TK-Suite Set and remove the entry.
!9#714
y&
!
Pairing - the DECT 50 as an intelligent
Cordless Phone Receiver
By using the pairing function the ST 40 and DECT 50 are treated as
one
telephone.
Dial a number on your ST 40 and continue the call on your DECT 50 or vice versa. Broker
between the telephones by just lifting the handset. The call can be simply continued on the
other phone. Activated features on the ST 40 will also be indicated on the display of the DECT
50. Furthermore the DECT 50 has 10 function buttons of its own and therefore the total
number of function buttons available between the ST 40 and DECT 50 is 30. Just to round up
the overall concept both phone have a joint call log and answering machine control.
Pairing Undo
Содержание DECT 50
Страница 1: ...1 Bedienung DECT 50 User Guide System DECT...
