AGFA 5420/100 Скачать руководство пользователя страница 135

Страница: 135 / 188

DX-D 400

User Manual

0232F EN

20191213

125

Note in the following table the configuration of the Workstation assigned for
each push-button.

PUSH-BUTTONS

WORKSTATION (Tube, Device, etc.)

Note.-- Workstation data such as X-ray Tube, Device, Ion Chambers, etc... must be registered.

6.1.3

FOCAL SPOT INDICATORS AND SELECTORS

LARGE FOCAL SPOT

: Indicates that the “

Large Focal Spot

” of the X-ray Tube

has been selected.

SMALL FOCAL SPOT

: Indicates that the “

Small Focal Spot

” of the X-ray Tube

has been selected.

FOCAL SPOT SELECTORS

: Each push-button selects the related Focal Spot

of the X-ray Tube, keeping kVp and mAs constant (maximum mA available and
minimum Exposure Time).

The Focal Spot change can be done whenever the present
conditions of the X-ray Tube allow it.

The mA station set for the Focal Spot change is configured by the
field engineer during the installation.

The Focal Spot may also be selected:



according to the selected mA station.



by pressing “

” + “

mA or mAs increase

” push-buttons to select Large

Focal Spot, or by pressing “

” + “

mA or mAs decrease

” push-buttons

to select Small Focal Spot.

Note

Содержание 5420/100





























































































































































































Результаты поиска

Содержание 5420/100

Отзывы:

Бренды по названию

Популярные бренды

AGFA 5420/100, Руководство пользователя

Результаты поиска

Содержание 5420/100

Отзывы:

Бренды по названию

Популярные бренды