AGFA 5366/500 Скачать руководство пользователя страница 25

Страница: 25 / 148

Safety precautions

WARNING:

Safety is only guaranteed when trained personnel have installed

the printer.

WARNING:

All medical products must be used by trained and qualified

personnel.

WARNING:

The printer must only be operated according to its specifications

and its intended use. Any operation not corresponding to the

specifications or intended use may result in hazards, which in

turn may lead to serious injuries or fatal accidents (for example

electric shocks). The manufacturer positively will not assume

any liability in these cases.

WARNING:

Improper changes, additions, maintenance or repair of the

system can lead to personal injury, electrical shock and damage

to the equipment. Safety is only guaranteed when changes,

additions, maintenance or repairs are carried out by a certified

field service engineer. A non certified engineer performing a

modification or service intervention on a medical device, acts on

his own responsibility and makes the warranty void.

WARNING:

System unavailability due to hardware or software failure. If the

product is used in critical clinical workflows, a backup system

has to be foreseen.

WARNING:

All images created using any image technology can show

artifacts which could be mixed up with diagnostic relevant

information. If there is any doubt that the diagnostic

information could not be absolutely true, additional

investigations must be performed to get a clear diagnostic.

Note

Film jam removal or Cleaning the printer thermal head

can be done without switching the power off. Nevertheless, care

should be taken and the following instructions should be

respected:

DRY 1.4, DRY 2.4 | Introduction |

3631B EN 20210601 1655

Содержание 5366/500





















































































































































Результаты поиска

Содержание 5366/500

Отзывы:

Бренды по названию

Популярные бренды

AGFA 5366/500, Руководство пользователя

Результаты поиска

Содержание 5366/500

Отзывы:

Бренды по названию

Популярные бренды