manualshive.com logo in svg

AGFA 5366/500, Руководство пользователя

Поделиться
Скачать
AGFA 5366/500 Скачать руководство пользователя страница 108

Cleaning and disinfection

All appropriate policies and procedures should be followed to avoid
contamination of the staff, patients and device. All existing universal
precautions should be taken to avoid that the digitizer comes into contact with
potential contaminations. Details about cleaning can be found in the following
pages.

To clean the exterior of the printer:

1.

Switch off the printer.

2.

Remove the power plug from the socket.

3.

Wipe the exterior of the printer with a clean, soft, damp cloth.
Use a mild soap or detergent if required but never use an ammonia–based

cleaner.

WARNING:

Make sure no liquid gets in the printer.

Note

: 

Do not open the printer for cleaning. No components

inside the printer require cleaning by the user.

4.

Plug in the printer and switch it on.

Related Links

Switching on the printer

 on page 68

Switching off the printer

 on page 71

108

 | DRY 1.4, DRY 2.4 | Preventive maintenance schedule

3631B EN 20210601 1655

Содержание 5366/500





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды