Agent W880, Руководство по эксплуатации

Страница: 9 / 18

3. Operation
3.1 Making and Receiving Calls
3.1.1 Making an outgoing call in Telephone mode.
• Ensure that the ‘TEL’ button (7) on the front of
the headset base is selected.
• Lift the headset from the base or press the
headset’s ‘ON/OFF’ button (2) if you are already
wearing it and the base ‘IN USE’ LED (5) will
light. If a handset Lifter or Electronic
Hookswitch device is connected to the headset
base, the line will be seized. Otherwise, you will
also need to activate the Headset port via your
telephone terminal.
• Dial the telephone number on the telephone
terminal
• After fi nishing the call, replace the headset on
the base or press the ON/OFF button (2) to
disconnect. The ‘IN USE’ LED (5) will turn off .
3.1.2 Receive an incoming call in Telephone mode.
• If there is an incoming call from the telephone
line and the headset base is connected to a
handset lifter or Electronic Hook switch device,
the ‘TEL’ LED (7) and headset LED (1) will fl ash,
also a ring tone will be heard on the headset.
• Lift the headset from the base or press the
headset’s ‘ON/OFF’ button (2) if you are already
wearing it to answer the call. The base
‘IN USE’ LED (5) will light. If a handset Lifter or
Electronic Hookswitch device is connected to
the headset base, the line will be seized.
Otherwise, you will also need to activate the
Headset port via your telephone terminal.
• To end the call, replace the headset on the base
or press the headset ON/OFF button (2).