Agent W880, Руководство по эксплуатации

Страница: 7 / 18

• Install the battery into the headset if not fi tted.
The little line on the battery has to match the
line on the battery slot, otherwise the battery
will not fi t.
• The Headset LED (1) will turn on for about
2 seconds then turn off . Now your headset is in
standby mode.
NOTE: The fi rst time you use your headset, it is
recommended that the headset is charged for a
minimum of 4 hours before use.
2.1 Connecting to a telephone or terminal with a
headset port
• Using the headset cord supplied with the
product, connect the ‘TEL’ port (15) on Headset
Base with the Headset port on your telephone.
• Use the power adaptor supplied with the
product to connect the Headset Base (13) to a
power socket.
• You may need to adjust the wiring switch (16)
that is located on the side of the Headset Base
to fi nd the correct wiring for your device.
2.2 Connecting to a telephone or terminal without
a headset port
• Using the headset cord supplied with the
product, connect the ‘TEL’ port (15) on Headset
Base with the ‘Handset’ port on your telephone.
• Connect the telephone handset cord to the
Handset (14) port on the Headset Base.
• Use the power adaptor supplied with the
product to connect the Headset Base (13) to a
power socket.
• You may need to adjust the wiring switch (16)
that is located on the side of the Headset Base
to fi nd the correct wiring for your device.