Agent W880, Руководство по эксплуатации

Страница: 12 / 18

3.9 Making A Conference Call
Your AGENT DECT Headset allows a second
headset to be temporally connected to the base
so that you can have a three way conference call.
•
Setup the call using the primary headset unit.
• Once on the call, place the second AGENT
DECT headset unit on the base charger.
• After about 1 second, the Headset ‘IN USE’ LED
(1) of the new headset will turn on and the
base ‘IN USE’ LED (5) will fl ash to indicate the
headset is registering with base unit.
• Once the registering has completed, the base
‘IN USE’ LED (5) will stop fl ashing and the
additional headset LED will fl ash.
• Once the registration has completed, a
confi rmation sound will be heard on the
primary headset.
• Lift the additional headset from the base and
it will enter talk mode. The two headsets are
now in conference mode.
NOTE: The additional headset will only remain
registered to the base for the duration of the call.
After the primary headset has ended the call, the
unit will return to its normal state.
3.10 Overview of audio signals
Action Audio Indication
Low Battery 2 rapid beeps (60 sec repeat)
Nearly Out Of Range 2 beeps
Out Of Range
2 pitch tone
Back In range 4 rapid beeps
Receiver Volume
Up/Down
1 beep
Mute On 2 pitch tone (8 sec repeat)
Mute Off 1 beep
Ringer (EH device) Multi Tone (2 sec repeat)