5
Installation of Applicator
1. Installation of Mounting Brackets, Tank, Pump Manifold and Hose Manifold (450 & 445 only)
Model 445
Mount the unit on the diagonal frame behind the twine box, as pictured using the base clamp (001-
4406) and u-bolts (001-4406A). Locate the top reach rod (Figure 1) in a position opposing the
overhanging tank. Bolt one end to the top stub pipe on the tank saddle and the other end to a secure
location on the baler.
NOTE: REACH RODS MAY HAVE TO BE BENT ON THE TAB TO ALIGN
PROPERLY.
A. Recommended Mount
Locate parts bag 8. The U shaped bracket (001-4647) will already be attached to the saddle and
will need to be inverted to fit on the bottom of the saddle as shown in Figure 1. Reattach the
bracket to the bottom of the saddle using the four 1/4 x 1 bolts, nuts, flats and lock washers.
Connect the pump plate mounting bracket (001-4646C), shown in Figure 2, using two 3/8 x 1 1/4
bolts, nuts, locks, and flat washers to the U shaped bracket (001-4647). Install the rest of the
pump plate as shown in Figure 3. Attach the pump plate holder (001-4646D) to pump plate
mounting bracket (001-4646C) using four 3/8 x 3/4 flange head bolts.
Figure 1
Figure 1
Figure 2
Figure 3
