11
10
for 30 seconds and needlessly depletes the batteries unless you’re
ready to follow through and take a measurement. Once you get a
read-out, the receiver batteries stop working until your next
measurement.
• Always store and transport the SmartRod in the protective
carrying bag. It can also hold extra batteries, user manual, and
other items.
• Do not wipe dust or dirt off the detector reception window or
LCD display with a dry cloth or other abrasive material as
scratching could occur, reducing visibility through these windows.
A soft cloth and mild soap and water are effective.
ELECTROMAGNETIC COMPATIBILITY (EMC)
Description
The term Electromagnetic Compatibility is taken to mean the capability
of the product to function smoothly in an environment where
electromagnetic radiation and electrostatic discharges are present, and
without causing electromagnetic disturbances to other equipment.
WARNING
Electromagnetic radiation can cause disturbances in other
equipment. Although the product meets the strict regulations and
standards which are in force in this respect, the manufacturer
cannot completely exclude the possibility that other equipment may
be disturbed.
CAUTION
There is a risk that disturbances may be caused in other equipment
if the product is used in conjunction with accessories from other
manufacturers, for example field computers, personal computers,
two-way radios, nonstandard cables or external batteries.
Precautions:
Use only the equipment and accessories recommended by the
manufacturer. When combined with the product, they meet the
strict requirements stipulated by the guidelines and standards.
When using computers and two-way radios, pay attention to the
information about electromagnetic compatibility provided by the
manufacturer.
CAUTION
Disturbances caused by electromagnetic radiation can result in
erroneous measurements. Although the product meets the strict
regulations and standards within this respect, the manufacturer
cannot completely exclude the possibility product may be disturbed
by very intense electromagnetic radiation, near radio transmitters,
two-way radios or diesel generators.
Precautions:
Check the plausibility of results obtained under these conditions.
WARNING
If the product is operated with connecting cables attached at one
of their two ends, for example, external supply cables, interface
cables, the permitted level of electromagnetic radiation may be
exceeded and the correct functioning of other products may be
impaired.
4. Care and Handling
To attain the highest precision
This product is designed to compensate for temperature differences.
However, when high precision is desired (+/- 3/32" or +/- 2,5 mm)
avoid thermal shock during operation.
For instance, if you take the SmartRod from air-conditioned storage
and want to use it immediately outside on a hot day, completely
extend and collapse it once or twice to reach uniform temperature.
PRECAUTIONS
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the
national regulations in force in your country.
Technical Tips
5. Safety Directions
SmartRod-16june.qxp 28/06/09 14:46 Page 10
Содержание SmartRod
Страница 3: ...1 2 3 4 1 User Manual Smar tRod ...
